Hi I'm new to transformers legends and o want to know,every time I start a upgrade the card has electro signals run across it,do I just wait till it finishes or what do I do,please help me!!!
Hi I'm new to transformers legends and o want to know,every time I start a upgrade the card has electro signals run across it,do I just wait till it finishes or what do I do,please help me!!!
For me, I just continue tapping on the screen during upgrading, as it skips the animation of the upgrading process
When leveling up a character card, we tend to use R1 and R2 cards as fodder. I will point out, that you should keep any cards that are R3 and R4 to build your deck. An R2 card has a max level of 30, R3 has a max level of 50 and R4 has a max level of 65. That being said, it takes more than a couple of cards to fully max a level. In fact you need anywhere from 30 ~ 150 cards to complete the process, of course the higher (Rx) will require more. There is a difference between R1 and R2, it usually takes twice as many R1 to give the same amount of an R2 card. So we tend to use more R2's than R1's.
As far as the animation scene's, you can just tap the screen and it wont affect the outcome.
Also if your card didn't level, then it needs more cards to do so.
To see your card's level progress, u can check the XP% bar on the card itself. I also use R3's (spare ones and low-end ones) as my upgrade fodder.
One question. If I upgrade the robot mode and the alt mode to the max and then I start tran-scan it, does it give much impact? or it will be the same as having level 1 card tran-scan together?
If you trans-scan the cards together, you only get a 5% bonus. If you max each card first and then combine them then you get a 10% bonus instead.
For -1 & cards I wouldn't. there is a great post around here somewhere on transcaning upgrade theories ...run a search.
I'd only transcan lvl 1's and lvl 2's for your cyberdex Mikerazz1978